- Blades, Shafts, Media etc.
- Industrial Mixers
- Packaging Equipment
- Other Process Equipment
6 articles in the categorie Technical Discussions
Disperser Power Calculator
Published : 11/16/2018 17:48:38 | Categories : High Speed Dispersion , Technical Discussions
Typical power requirements are in the range of 10 HP per 100 gallons of product. Of all the "Rules of Thumb" the issues resulting from this pose the most severe issues. While not difficult to [...]
Published : 08/30/2016 18:32:34 | Categories : High Speed Dispersion , Technical Discussions
Blade Speed (tip speed), measures how far a point on the outer most edge of the disperser blade travels in a given amount of time. Normally blade speed for a high speed disperser is targeted at 5200
Louvered Blade Mounting Considerations - Clear Area
Published : 08/30/2016 17:18:42 | Categories : High Speed Dispersion , Technical Discussions
Beyond impeller bore configurations, with the Conn styles as well as other louvered or vented styles open area in the center of the impeller must also be considered.