HSXP Blade

$119.00

The HSXP series, Turbo Pump blade has the same serrated teeth as the HSX series and also includes alternating fins in the center of the impeller to help pump the material through the blade. With a combination of the serrated teeth and the pumping fins, your batch will have the best of both worlds, high dispersion and high pumping action from one blade.

Diameter
Material
Wear Treatment
Quantity

This product is no longer in stock with the selected values, please select smaller values.
loader
Optional Mounting Hub
Hubs are only required when mounting to non-standard disperser or adding an additional blade mid shaft.
Option image

Blade Mounting
Option image


Split Blade
Required when blade is too large to fit through manway or opening in tank. May be used to facilitate installation of mid shaft blade.

in

Bore
Minimum: 0
Maximum: 6
Unit: inch
in

Keyway
Minimum: 0
Maximum: 1
Unit: inch

No. Pinholes
Minimum: 0
Maximum: 8
in

Pin Diameter
Minimum: 0
Maximum: 1
Unit: inch
in

Bolt Circle
Minimum: 0
Maximum: 10
Unit: inch

angle
Minimum: 0
Maximum: 360
Angle between keyway and pinhole (when both ar present)
per unit
*Complete Quote Now.  Or access any time from Top Nav Bar.

The Quickblades HSXP series, Turbo Pump blade has the same serrated teeth as the HSX series and also includes alternating fins in the center of the impeller to help pump the material through the blade. With a combination of the serrated teeth and the pumping fins, your batch will have the best of both worlds, high dispersion and high pumping action from one blade. If you have problems pulling powders down into the vortex, the HSXP series blade is the right choice for you.

BLX020

Related articles on blog