![U022- Anchor Blade 2 x 2 in - welded to 16 x 5/16 in shaft - 316 SS electropolished U022- Anchor Blade 2 x 2 in - welded to 16 x 5/16 in shaft - 316 SS electropolished](https://www.dispersetech.com/351-large_default/caframo-tangential-flow-impeller.jpg)
![U022- Anchor Blade 2 x 2 in - welded to 16 x 5/16 in shaft - 316 SS electropolished U022- Anchor Blade 2 x 2 in - welded to 16 x 5/16 in shaft - 316 SS electropolished](https://www.dispersetech.com/351-large_default/caframo-tangential-flow-impeller.jpg)
Caframo Tangential Flow Lab Impellers are effective for low speed, high viscosity mixing. These blades have more surface area to contact the thick product being mixed. Because thicker mixtures are usually mixed more slowly a blade diameter closer to the full diameter of the vessel can be used so that the product close to the edge of the vessel is mixed. Available in both anchor and paddle styles.
These paddles have more surface area to contact the thick product being mixed. Because thicker mixtures are usually mixed more slowly a paddle diameter closer to the full diameter of the vessel can be used so that the product close to the edge of the vessel is mixed.
Mfr. No. | Diameter | Height | Length | Shaft D | Style |
---|---|---|---|---|---|
U022 | 2 | 2 | 16 | 5/16 | anchor |
A183 | 3.125 | 15.75 | 5/16 | anchor | |
U044 | 4 | 4 | 36 | 3/8 | anchor |
U055 | 5 | 5 | 36 | 3/8 | anchor |
U044SW | 5.75 | 5 | 36 | 3/8 | anchor |
U510 | 10 | 5 | 36 | 3/8 | anchor |
A250 | 1.5 | 15.75 | 5/16 | paddle | |
A150 | 2.8 | 15.75 | 5/16 | paddle |
You might also like