Quick View
F-Blade | Sawtooth Dispersion Blade
$92.00
Previous
Next
Model D Direct Drive Electric Mixer
$1,471.00
Mix-Mor Incorporated Model D Portable Direct Drive Electric Mixer
MixMor Offers high quality, heavy duty portable mixers ranging from 1/4 to 5 hp. With shaft diameters from 5/8" through 1-1/4", we can handle even the toughest products.
* see table below for specifications on the individual mixers.
Mix-Mor Incorporated Model D Portable Direct Drive Electric Mixer
MixMor heavy-duty direct drive mixers use standard NEMA C face motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy-duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360 rotation on the horizontal plane and 100 on the vertical plane for optimum mixer shaft angle.
SPECIFICATIONS
| Model | Power Source | Mixer | Shaft | Impeller Quantity / Diameter |
weight | ||
|---|---|---|---|---|---|---|---|
| hp | rpm | Single | Dual | ||||
| D-14 | 115/230 Volt,1φ,60hz | ¼ | 1750 | 5/8" x 36" | 4" | 3½" | 34 |
| D-13 | 115/230 Volt,1φ,60hz | ⅓ | 1750 | 5/8" x 36" | 4½" | 4" | 35 |
| D-12 | 115/230 Volt,1φ,60hz | ½ | 1750 | 5/8" x 48" | 5" | 4½" | 52 |
| D-34 | 115/230 Volt,1φ,60hz | ¾ | 1750 | 5/8" x 48" | 5½" | 5" | 55 |
| D-11 | 230/460 Volt,3φ,60hz | 1 | 1150 | 7/8" x 60" | 6½" | 6" | 85 |
| D-15 | 230/460 Volt,3φ,60hz | 1½ | 1150 | 7/8" x 60" | 7" | 6½" | 112 |
| D-2 | 230/460 Volt,3φ,60hz | 2 | 1150 | 7/8" x 60" | 7½" | 7" | 123 |
| D-3 | 230/460 Volt,3φ,60hz | 3 | 1150 | 1-1/4" x 60" | 8" | 7½" | 159 |
| D-5 | 230/460 Volt,3φ,60hz | 5 | 1150 | 1-1/4" x 60" | 8" | 7½" | 188 |
Many options are available:
- Motors: Standard, commercially available, NEMA C face motors in all enclosures and power requirements. Including:
- Explosion proof
- Wash Down Duty
- Variable Speed Drives: Available with Inverter, AC variable frequency or Accumix® SCR/DC drives in NEMA 1 or 4 enclosures.
- Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
- Impeller Speeds: Direct Drive 1150, 1750 or 3450 rpm.
- All Stainless Steel Mixers
- Coated Shaft and Impellers
- Sanitary Finishes
- Shaft and Impellers in other Alloys
- Stainless Steel Motors
- USDA Accepted Models
- Impellers: Marine Props, hydrofoils, pitched and flat blade turbines, and dispersion blades are available.
Contact us with your requirements, we would be happy to prepare a suitable design for your application.
Comments (0)
No customer reviews for the moment.
